Timesheets
Built from clock-ons. Every hour here is already on a job.
| Person | Mon 21 | Tue 22 | Wed 23 | Thu 24 | Fri 25 | Sat 26 | Sun 27 | Total | Jobs | Internal | Flags | Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Corey LaneAssembly | 8.0 | 8.0 | 0 | 0 | 7.5 | 8.0 | 8.0 | 39.5 | 5 | — | No hours Wed, Thu | Approved |
| Nathan BrierleyAssembly | 8.0 | 8.0 | 0 | 0 | 8.0 | 7.8 | 7.8 | 39.5 | 6 | 2.8 | No hours Wed, Thu | Approved |
| Jake WhitlockCutting | 8.0 | 6.8 | 0 | 0 | 6.0 | 6.0 | 8.0 | 34.8 | 3 | 30.0 | No hours Wed, Thu | Approved |
| Ben HaddadFabrication | 8.0 | 8.0 | 0 | 0 | 5.8 | 5.7 | 7.3 | 34.8 | 4 | 13.0 | No hours Wed, Thu | Approved |
| Kyle MummeFabrication | 8.0 | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 40.0 | 4 | — | No hours Wed, Thu | Approved |
| Liam PriorFabrication | 8.0 | 7.5 | 0 | 0 | 5.0 | 8.0 | 8.0 | 36.5 | 4 | 16.8 | No hours Wed, Thu | Approved |
| Ryan CoatesFabrication | 8.0 | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 40.0 | 6 | 1.3 | No hours Wed, Thu | Approved |
| Tom GallagherFabrication | 7.8 | 8.0 | 0 | 0 | 5.5 | 8.0 | 8.0 | 37.3 | 5 | 7.0 | No hours Wed, Thu | Approved |
| Matt DonnellyHydraulics | 8.0 | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 40.0 | 4 | — | No hours Wed, Thu | Approved |
| Josh KerrMachining | 8.0 | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 40.0 | 2 | 37.3 | No hours Wed, Thu | Approved |
| Sam PetrovicMachining | 8.0 | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 40.0 | 2 | 36.3 | No hours Wed, Thu | Approved |
| Dylan RicciPDI & Dispatch | 8.0 | 7.8 | 0 | 0 | 8.0 | 8.0 | 8.0 | 39.8 | 6 | 14.8 | No hours Wed, Thu | Approved |
| Jess HarlowPaint | 8.0 | 7.5 | 0 | 0 | 8.0 | 8.0 | 5.3 | 36.8 | 4 | 13.3 | No hours Wed, Thu | Approved |
| Aiden KuhlService | 8.0 | 8.0 | 0 | 0 | 7.8 | 7.8 | 8.0 | 39.5 | 6 | — | No hours Wed, Thu | Approved |
| All floor staff | 111.8 | 109.5 | 101.5 | 107.3 | 108.3 | 538.3 | ||||||
Aiden Kuhl
Service Fitter · 39.5 h this week across 6 jobs
20 of 20
| Day | Job | Task | On | Off | Hours | From | |
|---|---|---|---|---|---|---|---|
| Sun, 27 Sept | J-26-0375 | 1. Strip old tynes & clean bar | 1:50pm | 3:05pm | 1h 15m | Phone | |
| Sun, 27 Sept | J-26-0375 | 4. Fit openers | 11:30am | 1:50pm | 2h 20m | Phone | |
| Sun, 27 Sept | J-26-0375 | 4. Fit openers | 9:20am | 11:00am | 1h 40m | Phone | |
| Sun, 27 Sept | J-26-0374 | 8. PDI & dispatch | 6:35am | 9:20am | 2h 45m | Phone | |
| Sat, 26 Sept | J-26-0386 | 5. Fit openers & press wheels | 11:30am | 2:54pm | 3h 24m | Phone | |
| Sat, 26 Sept | J-26-0386 | 5. Fit openers & press wheels | 10:39am | 11:00am | 0h 21m | Phone | |
| Sat, 26 Sept | J-26-0387 | 3. Hydraulic lift-out & hoses | 10:09am | 10:39am | 0h 30m | Phone | |
| Sat, 26 Sept | J-26-0374 | 8. PDI & dispatch | 9:23am | 10:08am | 0h 45m | Phone | |
| Sat, 26 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 6:35am | 9:20am | 2h 45m | Tablet | |
| Fri, 25 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 12:17pm | 2:47pm | 2h 30m | Phone | |
| Fri, 25 Sept | J-26-0379 | 6. Test & PDI | 11:30am | 12:17pm | 0h 47m | Phone | |
| Fri, 25 Sept | J-26-0379 | 6. Test & PDI | 8:47am | 11:00am | 2h 13m | Phone | |
| Fri, 25 Sept | J-26-0386 | 6. Calibrate & PDI | 6:32am | 8:47am | 2h 15m | Phone | |
| Tue, 22 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 11:30am | 3:04pm | 3h 34m | Phone | |
| Tue, 22 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 9:19am | 11:00am | 1h 41m | Phone | |
| Tue, 22 Sept | J-26-0379 | 6. Test & PDI | 8:19am | 9:19am | 1h 00m | Tablet | |
| Tue, 22 Sept | J-26-0379 | 5. Re-plumb seed & fert lines | 6:34am | 8:19am | 1h 45m | Tablet | |
| Mon, 21 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 11:30am | 3:01pm | 3h 31m | Phone | |
| Mon, 21 Sept | J-26-0374 | 7. Plumb hydraulics & seed lines | 10:01am | 11:00am | 0h 59m | Phone | |
| Mon, 21 Sept | J-26-0372 | 8. PDI & dispatch | 6:31am | 10:01am | 3h 30m | Phone |
By job this week
- J-26-0374NarrowFold 8.5m custom bar — 2 rank, 10" spacing18.5 h
- J-26-0386Darryl Drill 2400 — pasture drill6.0 h
- J-26-0379K-Hart opener retrofit — 80ft bar, 96 openers5.8 h
- J-26-0375K-Hart opener retrofit — 48ft bar, 58 openers5.3 h
- J-26-0372Spyder Drill 40ft (12m) — assembly & PDI3.5 h
- J-26-0387Yetter coulter retrofit — 36 row0.5 h