Timesheets
Built from clock-ons. Every hour here is already on a job.
| Person | Mon 5 | Tue 6 | Wed 7 | Thu 8 | Fri 9 | Sat 10 | Sun 11 | Total | Jobs | Internal | Flags | Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Corey LaneAssembly | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 6 | 2.3 | No hours Tue, Wed | Approved |
| Nathan BrierleyAssembly | 8.0 | 0 | 0 | 8.0 | 8.0 | 7.8 | 8.0 | 39.8 | 5 | 4.5 | No hours Tue, Wed | Approved |
| Jake WhitlockCutting | 6.5 | 0 | 0 | 8.0 | 8.0 | 8.0 | 7.5 | 38.0 | 4 | 18.0 | No hours Tue, Wed | Approved |
| Ben HaddadFabrication | 8.0 | 0 | 0 | 8.0 | 6.0 | 5.3 | 8.0 | 35.3 | 5 | 20.5 | No hours Tue, Wed | Approved |
| Kyle MummeFabrication | 8.0 | 0 | 0 | 8.0 | 7.5 | 7.8 | 8.0 | 39.3 | 6 | — | No hours Tue, Wed | Approved |
| Liam PriorFabrication | 7.5 | 0 | 0 | 7.3 | 6.3 | 6.8 | 8.0 | 35.8 | 5 | 19.8 | No hours Tue, Wed | Approved |
| Ryan CoatesFabrication | 8.0 | 0 | 0 | 8.0 | 8.0 | 7.8 | 8.0 | 39.8 | 5 | — | No hours Tue, Wed | Approved |
| Tom GallagherFabrication | 7.5 | 0 | 0 | 8.0 | 5.3 | 6.5 | 8.0 | 35.3 | 5 | 23.5 | No hours Tue, Wed | Approved |
| Matt DonnellyHydraulics | 4.5 | 0 | 0 | 7.3 | 8.0 | 5.5 | 7.0 | 32.3 | 2 | 24.8 | No hours Tue, Wed | Approved |
| Josh KerrMachining | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 4 | 25.5 | No hours Tue, Wed | Approved |
| Sam PetrovicMachining | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 4 | 27.8 | No hours Tue, Wed | Approved |
| Dylan RicciPDI & Dispatch | 5.8 | 0 | 0 | 8.0 | 7.0 | 8.0 | 8.0 | 36.8 | 5 | 19.3 | No hours Tue, Wed | Approved |
| Jess HarlowPaint | 8.0 | 0 | 0 | 8.0 | 7.8 | 8.0 | 5.8 | 37.5 | 5 | 4.0 | No hours Tue, Wed | Approved |
| Aiden KuhlService | 8.0 | 0 | 0 | 7.3 | 8.0 | 8.0 | 8.0 | 39.3 | 7 | 3.0 | No hours Tue, Wed | Approved |
| All floor staff | 103.8 | 109.8 | 103.8 | 103.3 | 108.3 | 528.8 | ||||||
Aiden Kuhl
Service Fitter · 39.3 h this week across 7 jobs
21 of 21
| Day | Job | Task | On | Off | Hours | From | |
|---|---|---|---|---|---|---|---|
| Sun, 11 Oct | J-26-0406 | 1. Workshop maintenance & jigs | 2:22pm | 3:07pm | 0h 45m | Phone | |
| Sun, 11 Oct | J-26-0406 | 1. Workshop maintenance & jigs | 1:37pm | 2:22pm | 0h 45m | Phone | |
| Sun, 11 Oct | J-26-0401 | 6. Fit Gent openers (12" spacing) | 11:52am | 1:37pm | 1h 45m | Phone | |
| Sun, 11 Oct | J-26-0406 | 1. Workshop maintenance & jigs | 11:30am | 11:48am | 0h 18m | Phone | |
| Sun, 11 Oct | J-26-0406 | 1. Workshop maintenance & jigs | 9:48am | 11:00am | 1h 12m | Phone | |
| Sun, 11 Oct | J-26-0389 | 7. Calibrate & PDI | 6:33am | 9:48am | 3h 15m | Phone | |
| Sat, 10 Oct | J-26-0401 | 6. Fit Gent openers (12" spacing) | 1:33pm | 3:03pm | 1h 30m | Phone | |
| Sat, 10 Oct | J-26-0401 | 6. Fit Gent openers (12" spacing) | 11:30am | 1:32pm | 2h 02m | Tablet | |
| Sat, 10 Oct | J-26-0401 | 6. Fit Gent openers (12" spacing) | 10:32am | 11:00am | 0h 28m | Tablet | |
| Sat, 10 Oct | J-26-0389 | 6. Fit openers & press wheels | 6:32am | 10:32am | 4h 00m | Phone | |
| Fri, 09 Oct | J-26-0378 | 4. Test & PDI | 12:18pm | 3:03pm | 2h 45m | Phone | |
| Fri, 09 Oct | J-26-0378 | 3. Hydraulic lift-out & hoses | 11:30am | 12:18pm | 0h 48m | Tablet | |
| Fri, 09 Oct | J-26-0378 | 3. Hydraulic lift-out & hoses | 6:33am | 11:00am | 4h 27m | Tablet | |
| Thu, 08 Oct | J-26-0396 | 3. Fit bin & Zero Max drive | 11:30am | 2:16pm | 2h 46m | Phone | |
| Thu, 08 Oct | J-26-0396 | 3. Fit bin & Zero Max drive | 10:01am | 11:00am | 0h 59m | Phone | |
| Thu, 08 Oct | J-26-0394 | 7. Calibrate & PDI | 8:16am | 10:01am | 1h 45m | Phone | |
| Thu, 08 Oct | J-26-0396 | 3. Fit bin & Zero Max drive | 7:16am | 8:16am | 1h 00m | Phone | |
| Thu, 08 Oct | J-26-0378 | 3. Hydraulic lift-out & hoses | 6:31am | 7:16am | 0h 45m | Tablet | |
| Mon, 05 Oct | J-26-0393 | 1. Assess & strip down | 11:47am | 3:02pm | 3h 15m | Phone | |
| Mon, 05 Oct | J-26-0393 | 4. Reassemble & test | 11:30am | 11:47am | 0h 17m | Phone | |
| Mon, 05 Oct | J-26-0393 | 4. Reassemble & test | 6:32am | 11:00am | 4h 28m | Phone |
By job this week
- J-26-0378K-Hart fertiliser coulter retrofit — 36 row8.8 h
- J-26-0393Repair — press wheel arms & bearings8.0 h
- J-26-0389TowBeHine™ 3.0m — pasture drill7.3 h
- J-26-0401NT 'Tommy' Drill 6.0m — 12" spacing5.8 h
- J-26-0396Darryl Drill 3000 — pasture drill4.8 h
- J-26-0406Workshop — maintenance, jigs & yard (internal)3.0 h
- J-26-0394TowBeHine™ 3.0m — pasture drill1.8 h