Timesheets
Built from clock-ons. Every hour here is already on a job.
| Person | Mon 19 | Tue 20 | Wed 21 | Thu 22 | Fri 23 | Sat 24 | Sun 25 | Total | Jobs | Internal | Flags | Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Corey LaneAssembly | 8.0 | 0 | 0 | 8.0 | 7.8 | 8.0 | 8.0 | 39.8 | 6 | — | No hours Tue, Wed | Approved |
| Nathan BrierleyAssembly | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 6 | — | No hours Tue, Wed | Approved |
| Jake WhitlockCutting | 8.0 | 0 | 0 | 7.3 | 7.3 | 7.3 | 8.0 | 37.8 | 3 | 16.5 | No hours Tue, Wed | Approved |
| Ben HaddadFabrication | 7.3 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 39.3 | 6 | — | No hours Tue, Wed | Approved |
| Kyle MummeFabrication | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 7 | — | No hours Tue, Wed | Approved |
| Liam PriorFabrication | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 7 | — | No hours Tue, Wed | Approved |
| Ryan CoatesFabrication | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 6 | — | No hours Tue, Wed | Approved |
| Tom GallagherFabrication | 7.5 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 39.5 | 4 | — | No hours Tue, Wed | Approved |
| Matt DonnellyHydraulics | 8.0 | 0 | 0 | 8.0 | 7.8 | 6.5 | 5.3 | 35.5 | 3 | 11.8 | No hours Tue, Wed | Approved |
| Josh KerrMachining | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 6 | 8.8 | No hours Tue, Wed | Approved |
| Sam PetrovicMachining | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 5 | 10.0 | No hours Tue, Wed | Approved |
| Dylan RicciPDI & Dispatch | 8.0 | 0 | 0 | 7.3 | 6.5 | 7.3 | 4.3 | 33.3 | 5 | 19.5 | No hours Tue, Wed | Approved |
| Jess HarlowPaint | 8.0 | 0 | 0 | 8.0 | 8.0 | 8.0 | 8.0 | 40.0 | 5 | 7.5 | No hours Tue, Wed | Approved |
| Aiden KuhlService | 8.0 | 0 | 0 | 8.0 | 8.0 | 7.3 | 7.5 | 38.8 | 6 | — | No hours Tue, Wed | Approved |
| All floor staff | 110.8 | 110.5 | 109.3 | 108.3 | 105.0 | 543.8 | ||||||
Ryan Coates
Fabricator · 40.0 h this week across 6 jobs
16 of 16
| Day | Job | Task | On | Off | Hours | From | |
|---|---|---|---|---|---|---|---|
| Sun, 25 Oct | J-26-0412 | 3. Fabricate main frame | 11:30am | 3:00pm | 3h 30m | Phone | |
| Sun, 25 Oct | J-26-0412 | 3. Fabricate main frame | 9:00am | 11:00am | 2h 00m | Phone | |
| Sun, 25 Oct | J-26-0412 | 4. Fabricate wings & hinges | 6:30am | 9:00am | 2h 30m | Phone | |
| Sat, 24 Oct | J-26-0410 | 2. Fit coulters | 11:30am | 3:09pm | 3h 39m | Phone | |
| Sat, 24 Oct | J-26-0410 | 2. Fit coulters | 10:09am | 11:00am | 0h 51m | Phone | |
| Sat, 24 Oct | J-26-0412 | 3. Fabricate main frame | 6:35am | 10:05am | 3h 30m | Phone | |
| Fri, 23 Oct | J-26-0410 | 1. Fabricate coulter mounts | 12:22pm | 3:07pm | 2h 45m | Phone | |
| Fri, 23 Oct | J-26-0409 | 2. Fabricate opener mounts | 11:30am | 12:19pm | 0h 49m | Phone | |
| Fri, 23 Oct | J-26-0409 | 2. Fabricate opener mounts | 6:34am | 11:00am | 4h 26m | Phone | |
| Thu, 22 Oct | J-26-0407 | 1. Strip old tynes & clean bar | 11:30am | 3:02pm | 3h 32m | Phone | |
| Thu, 22 Oct | J-26-0407 | 1. Strip old tynes & clean bar | 9:02am | 11:00am | 1h 58m | Phone | |
| Thu, 22 Oct | J-26-0409 | 2. Fabricate opener mounts | 6:32am | 9:02am | 2h 30m | Phone | |
| Mon, 19 Oct | J-26-0414 | 2. Fabricate frame & drawbar | 2:00pm | 3:00pm | 1h 00m | Phone | |
| Mon, 19 Oct | J-26-0409 | 1. Strip old tynes & clean bar | 11:30am | 2:00pm | 2h 30m | Phone | |
| Mon, 19 Oct | J-26-0409 | 1. Strip old tynes & clean bar | 10:30am | 11:00am | 0h 30m | Phone | |
| Mon, 19 Oct | J-26-0392 | 2. Assemble press wheel arms | 6:30am | 10:30am | 4h 00m | Tablet |
By job this week
- J-26-0412NarrowFold 8.5m custom bar — 2 rank, 10" spacing11.5 h
- J-26-0409K-Hart opener retrofit — 60ft bar, 72 openers10.8 h
- J-26-0410Yetter coulter retrofit — 48 row7.3 h
- J-26-0407Gent 8620 opener retrofit — 50ft bar5.5 h
- J-26-0392Press wheel conversion kit — 13" VT × 364.0 h
- J-26-0414Darryl Drill 2400 — pasture drill1.0 h